Product Categories

Contact Us

Add: No.9 Chengxiang Road, Dagang Town, Yancheng City, Jiangsu Province, China

P.C: 224043

Tel: 0086-515-88853166

Fax: 0086-515-88853166

Mail: jsshuoying@hotmail.com 


Home > News > Content

Auto-feeding Die Cutting Machine Maintenance Tips

Pre-precision adjustment, sheet-fed Auto-feeding Die Cutting Machine is to ensure that the pre-precision accuracy of the pre-positioning accuracy of the key parameters, adjust the accuracy of the regulation involved in many factors, some operators often only use the pre-inspection system, This method is unscientific. Although the pre-check system can avoid the paper is not in place, tooth row gripper paper caused by unreliable paper skew and other issues, but if you want to really adjust the accuracy of the system through the system, the probe diameter must be adjusted from about 1mm to 0.1mm Of the alarm accuracy, the fact that this can not be achieved. Therefore, should take into account the pressure roller, paper time, side regulation and other factors, the regulation accuracy to adjust to the best condition.

It is very important for some of the operator to turn off this detection function for a sheet-fed Auto-feeding Die Cutting Machine, which is extremely dangerous. If the press- Detection of normal and out of paper detection, then, once the press Department of paper jam situation, a few layers of paper will instantly superimposed, will cause a car accident, damage to the equipment, and the accident is very difficult to deal with.

Regular replacement of lubricants, the brand single-sheet Auto-feeding Die Cutting Machine factory documents are very strict lubrication cycle table, the various parts of the equipment required lubricants brand, model, especially the replacement of lubricating oil cycle are detailed Claim. In general, the basic business enterprises in accordance with the requirements of the brand, model to buy lubricants, but inadvertently on the regular replacement of lubricants. Many equipment lubrication management personnel in the replacement of the oil cycle is coming, see the oil in the fuel tank is still very clear, in the cost of cost considerations, to abandon the replacement of new lubricants plan, let the equipment continue to run.

Home | About Us | Products | News | Die Cutting Technology | Contact Us | Feedback | Mobile | XML

TEL: +86-515-88853166  E-mail: jsshuoying@hotmail.com

Copyright © Jiangsu Shuoying Precision Machinery Co.,Ltd