Product Categories

Contact Us

Add: No.9 Chengxiang Road, Dagang Town, Yancheng City, Jiangsu Province, China

P.C: 224043

Tel: 0086-515-88853166

Fax: 0086-515-88853166

Mail: jsshuoying@hotmail.com 

Die Cutting Technology

Cutting Machine The Development Of The Increase

(0.1mm ~ 0.3mm); incision without mechanical stress, Cutting Machine no shear burr; high precision machining (cutting), the cutting edge is small, the slit is narrow (0.1mm ~ 0.3mm) , Can not be damaged, do not damage the surface of the material; NC programming, can be processed arbitrary plan, you can format a large whole board cutting, no need to open mold, economical and time-saving, Cutting Machine laser can cut a lot of metal materials, stainless steel, carbon steel , Alloy steel, iron, copper, aluminum and other metal materials.

Laser cutting equipment is usually used in the structure of gantry type, cantilevered, the middle of the inverted beam. But with the laser processing applications to the high-speed, Cutting Machine high-speed, high stability of the development requirements and control technology development, gantry structure with its unique structural advantages to become the world's mainstream models, but also many well-known brand laser cutting machine The type of structure used by the manufacturer.

Fiber laser cutting equipment in the metal plate cutting applications, compared with the traditional CO2 laser cutting machine, the change is outside the optical path,Cutting Machine cutting head, auxiliary gas. The laser can be transmitted directly to the cutting head through the optical fiber, the optical path is stable and reliable to ensure the consistency of the whole frame cutting, and the machine does not need outside the optical path to protect the gas, will not be equipped with air compressor and other processing system; laser to the cutting head after collimation , Focusing can usually be configured focal length 125mm or 200mm focusing mirror, focusing lens and nozzle should be equipped with protective lenses to prevent the focus mirror from contamination; Cutting Machine fiber laser has a good focusing performance, short focus, narrow cutting width (Up to 0.1mm), higher speed, suitable for rapid cutting of the thin plate.

CNC machine tools commonly used in several linear shaft drive ball screw, rack and pinion, linear motor. Ball screw is usually used in the low-speed small trip CNC machine tools; gear rack is widely used to achieve high speed, large travel; linear motor used in high speed, Cutting Machine high acceleration, a special structure of CNC machine tools. In addition, the rack and pinion is divided into two kinds of straight and helical teeth. Helical teeth relative to the straight teeth, meshing area larger, gear and rack drive will be more stable.

Gantry-type structure of the laser cutting machine has two forms of movement, one is to move the gantry moving but the table fixed, the second is the gantry fixed and the table to move. For large format, high speed and high performance laser cutting machine, usually using the first form, Cutting Machine because the table with the workpiece movement is not suitable for high-speed and thick plate cutting. The bilateral drive ensures that the beam is balanced and the beam runs synchronously. And some manufacturers of laser cutting machine using gantry unilateral drive, servo motor installed in the gantry beam one end, Cutting Machine and then through a long axis will drive to the other end, to achieve double gear rack drive, single servo motor drive. Unilateral drive makes the beams at both ends of the force asymmetry, affecting the synchronization accuracy, reduce the dynamic performance of the machi

Previous: No Information

Next: Purchasing Shoe Machinery: Remember Five Points

Home | About Us | Products | News | Die Cutting Technology | Contact Us | Feedback | Mobile | XML

TEL: +86-515-88853166  E-mail: jsshuoying@hotmail.com

Copyright © Jiangsu Shuoying Precision Machinery Co.,Ltd